How to pair CiperLab 9700 through WiFi

Pair CiberLab 9700 via WiFi

Updated over a week ago


This document explains how to pair CiberLab 9700 via WiFi.

Detail Steps

1. Go to Settings > System > SCU.

2. Click Scan.

3. Select the Wifi connection you wish to connect > click Configure.

4. Click Yes to create a new profile.

5. Check settings and enter your Wifi password under Passphrase > click Commit to save > OK.

6. Select your profile from the list.

7. Go to Status tab. You should have IP address and signal strength show as below if handheld successfully connect to WiFi.

Related Information


Did this answer your question?