Description

Create your own locations with details. There are no real limits on the number of locations the WMS will support, practically the system is recommended to work with between 10 ā€“ 50 locations.


Detail Steps

CREATION

  1. Create a new Supplier Card in MYOB.
  2. The name of the card can be any name you like, however, we recommend you start the name with a common thread such as "LOC-" to group all the locations together in your MYOB file.
  3. Set the Card ID, this is the name you will see in the WMS drop down list, for example "COLDSTORE" or "NSW".
  4. Enter the Warehouse address and contact details, including a contact name, the location will not be created without it.
  5. On the details tab select identifiers and Set the ā€˜Lā€™ identifier, this lets the WMS know it is a Location not just a Supplier.
  6. Perform a maintenance replication and the process is complete.

EDIT

  1. Open the Supplier card in MYOB, the card identification can be searched in the card file.
  2. Edit Address, Contact, Phone numbers, Card Name and other details as required, ensuring the L identifier, card ID and Contact is not removed.
  3. Select OK to save
  4. Perform a maintenance replication and the process is complete.

Related Information


Note that BINS are not created within MYOB these are managed from the WMS.

A contact name and Identifier of "L" is compulsory.

For location to work in WMS, it needs minimum of the Street address and Contact to be filled up.