Description
Setting up the DATALOGIC SKORPIO WIRELESS CONNECTION and TELNET.
Detail Steps
Important Note SUMMIT CLIENT IS NOT REQUIRED for a SINGLE CONNECTION SETUP. |
1. IF A NEW WIRELESS CONNECTION REQUIRED - YOU NEED to Open the Settings/Network Connections.
The Blue Area indicates a WORKING CONNECTION.
The Signal Bars with ! means NO CONNECTION - OR - CONNECTION is DISABLED.
To Setup a CONNECTION:
Select the DEFAULT CONNECTION for the DEVICE - HOLD DOWN THE PEN.
IF THE FIRST ENTRY SHOWS - Enable - THEN CONNECTION IS CURRENTLY DISABLED.
SELECT ENABLE - if NO PREVIOUS CONNECTION has been setup - an AUTO SCAN OF THE WIRELESS will begin. Choose the WIRELESS SSID you require then CONFIGURE PASSWORD.
CONNECTION TO WMS MOBILITY SERVER
MAKE SURE YOUR TELNET SERVER IS RUNNING - THE FIREWALL IS ALLOWING PORT 23 and YOU HAVE SETUP the ALLUSERS SCRIPT.BAT to call the WMSCONSOLE.EXE.
START THE DATALOGIC Telnet CLIENT from START, PROGRAMS, DEVICE TOOLS > DL-TCL.
PRESS ESC.
CONFIGURE CONNECTION TO TELNET SERVER.
ENTER THE HOST IP - DO NOT USE NAME AS NO NAMESERVER IS CONFIGURED - TO USE NAME you must complete the Network Settings NameServer setup.
CHECK BARCODE CONFIGURATION SECTION - NOTICE THE ENTER KEY IS SET and is REQUIRED.
CONNECTING TO HOST SERVER
PRESS ENTER TO CONNECT:
NOW YOU CAN COMPLETE THE WORKFLOWS USING THE WIRELESS PDA.
TO ENTER WMSCONSOLE DIAGNOSTIC MODE - FROM THE MAIN MENU - after TERMINAL AND ZONE ARE CONFIRMED - PRESS BACKSPACE or . (DECIMAL POINT) - You will be able to scan barcodes and see the details being read by the program.
Related Information
None