Skip to main content

Create and scan barcodes using Motorola LS4278 scanner

Create and scan barcodes using Motorola LS4278 scanner

Updated over 2 years ago

Description

The issue on missing alphabet T in barcodes in Picking screen (when CAPS is turned off). It is due to a hardware issue.

Detail Steps

When creating and scanning barcodes, caps need to be set to OFF.


Please refer to the link below, and please read bottom page 7.
https://www.directid.com/OpalDownloads/catalog/manual/Symbol/LS4278/symLS4278qsg.pdf

Problem:
Scanned data is incorrectly displayed on the host.

Possible Cause:
The scanner is not programmed to work with the host.

Possible Solution:
Ensure proper host is selected.


Check the scanner’s host type parameters or editing options.


For RS-232, ensure the scanner’s communication parameters match the host’s settings.


For a keyboard wedge configuration, ensure the system is programmed for the correct keyboard type and the CAPS LOCK key is off.


Ensure editing options (e.g., UPC-E to UPC-A conversion) are properly programmed.
Refer to the Product Reference Guide for more information.

Example of issue:


When CAPS is turned on, the user can scan any barcodes containing T or t correctly.


When CAPS is turned Off, the user cannot scan barcodes containing T (barcode will be scanned out but missing alphabet T, making the barcode incorrect)
Users can scan barcodes with t correctly.

Related Information

There is no issue with other alphabet characters.

Did this answer your question?