This document explains how to setup a Wavelink Terminal Emulator Settings.

1. Please download and install this on your device.
​http://www.wavelink.com/download/Downloads.aspx?DownloadFile=23285&return

2. Setup the Mobility host server address and port 23.

3. This is the user guide for Wavelink TE.
​http://download.wavelink.com/Files/te-ug-73-20121204.pdf

4. Steps for setup connection on Wavelink TE.
a) Click on 'Terminal emulator' icon.

b). Click ( : ) right corner down > to review a setting menu .

c) Open Settings menu then pressing ‘Host Profile’ .

d) Host profile > Pop up a password required.
• Enter system password > press Ok.

e) Host Profile > Add New.

f) Enter profile name (any name) then under basic settings > type = VT220, Address:
IP of mobility server, port: 23

g) The rest of the settings are optional.
h) Then click back button > it will prompt to save the changes > Save.

i) Close and go to main screen > click Terminal emulator > tap to Connect > it will give the host name which you have configured and click on that to connect.

j) Connecting to the server…

k) Mobility session login screen.

None